If you’ve selected Interval (30 minute) Smart Services, you’ll have access to a full breakdown of your usage data through your Business Online account. Your breakdown will be available for you to view the next day and will be updated daily. This will provide you with “at a glance” information about how you are using electricity.

This will help you make more informed choices so you can start to shift your daily energy usage to times of the day where energy costs are lower. You can also get an idea of how much electricity different appliances are using by seeing your 30-minute usage breakdown.

If you select Non-Interval (Bi-Monthly) Smart Services, or if this is the only option available to you, you won’t be able to see your 30 minute usage breakdown, but we will receive your read once every two months. This will reduce the need for manual meter reads and will help keep your bills more accurate. You will also be able to view your Day, Night and Peak reads on your bills giving you a more insightful view of your electricity usage compared with standard non-smart meters.

If you have a low mobile reception in your area, you can opt-in for Non-Interval (Bi-Monthly) Smart Services. Depending on your connectivity level, we will receive your remote read once every two months. You will also have an option to provide manual meter reads if you opt-in for Non-Interval (Bi-Monthly) Smart Services. This will help keep your bills accurate.

If you have activated Interval (30 minute) Smart Services and your meter connectivity drops, we may need to move you to Non-Interval (Bi-Monthly) Smart Services.

ESB Networks are managing the installation of all smart meters regardless of your energy supplier. Find out more here.

Check below for your current meter type to know how to request a smart meter.

The upgraded smart meters will be safe and will comply with all necessary requirements and relevant international standards. For more information and scientific evidence on safety of smart meters click here.

Your smart meter will record the details of your consumption of electricity. ESB Networks will collect data on the total amount of electricity consumed over the previous 24-hour period daily for Interval (30 minute) Smart Services activated meters. This data will be used to provide information to support customer billing, customers switching suppliers and customers moving premises.

Smart meters that have been activated for Interval (30 minute) Smart Services will collect a detailed breakdown of your electricity consumed e.g. usage every 30 minutes. However, this information will only be shared with us if you have given us your consent while activating Interval (30 minute) Smart Services. To make sure the meter is working properly, ESB Networks will also collect non-personal data about the meter itself.

Smart meters that have been activated for Non-Interval (Bi-Monthly) Smart Services will read meters six times a year and will you’ll see Day, Night and Peak reads on your bills giving you a more insightful view of your electricity usage compared with standard non-smart meters.

All data collected from the meter will be securely stored in a central Meter Data Management System (MDMS) operated and managed by ESB Networks. You can find out more about how ESB Networks ensure meter data is safe and secure at www.esbnetworks.ie. At SSE Airtricity, we are committed to ensuring that your data and privacy is protected. For more information on how SSE Airtricity handles your personal information please visit our privacy notice.

Meter connectivity refers to ESB Networks’ ability to connect with your meter and get your electricity usage data from the meter. Meter connectivity levels depend on how many days in a rolling 30-day period ESB networks can retrieve data from your meter. The higher the number of days your meter can be read remotely in a month, the higher your meter connectivity will be. If you have high connectivity your connection can support both Interval (30 minute) Smart Services or Non-Interval (Bi-Monthly) Smart Services but if you have low connectivity, your connection will only support non-interval services.

• If your meter connectivity is 1: ESB networks will not be able to connect with your smart meter remotely and will continue to read your meter manually. In such scenario, you won’t be able to opt-in for Interval (30 minute) Smart Services.
• If your meter connectivity is 2: ESB networks will be able to connect with your smart meter but not reliably. In such scenario, you won’t be able to opt-in for Interval (30 minute) Smart Services.
• If your meter connectivity is 3: ESB networks will be able to connect with your smart meter reliably enough. In such scenario, you will be able to opt-in for Interval (30 minute) Smart Services.
• If your meter connectivity is 4: ESB networks will have full connectivity with your smart meter, you will be able to opt-in for Interval (30 minute) Smart Services. 

ESB Networks will check the level of connection at your meter point on a frequent basis. If you are an interval customer and your connectivity level dips, then your connection won’t support Interval (30 minute) Smart Services and we will be unable to receive your 30-minute usage data. To avoid estimations, your meter will be switched to Non-Interval (Bi-Monthly) Smart Services and we will receive one remote reading every two months. You won’t be able to access your 30-minute electricity usage breakdown information in your Business Online account. If you are a non-interval customer, change in connectivity won’t impact your current non-interval services.

30-minute usage data is the information regarding your energy consumption in every half hour period. Your 30-minute usage information will be logged remotely by your smart meter if you’ve opted for Interval (30 minute) Smart Services. ESB Networks will connect with your meter throughout the day to receive your 30-minute usage information, which will be sent to SSE Airtricity the following day. You will be able to access this 30-minute usage data at your Business Online account. Your account will be updated daily.

A time of use tariff (TOU) is a time-based billing structure under which the rate charged for each unit of electricity consumed can vary depending on the time of the day.

For example, you could have one rate for electricity consumed during the day, another rate for electricity consumed during the night, and another rate for electricity consumed during peak hours. This is very similar to the day night meters that are available today.

The Standard Smart Tariff is a time of use (TOU) tariff that is available to all smart meter customers. The time structure for this tariff is:

• Day (8 am to 11 pm, excluding peak time)
• Night (11 pm to 8 am)
• Peak (5 pm to 7 pm)

For more details on products and offerings, please contact us at 0818 81 21 44.

Peak time refers to the time of the day when the electricity demand on the grid is typically at its highest. These are the times when Irish energy networks are under strain as most households and businesses use electricity during this time. To take the pressure off the electricity grid, we offer varying electricity rates to our customers throughout the day to encourage customers to consume their energy during non-peak hours.

Currently, peak hours for smart standard tariffs are between 5pm to 7pm. During peak hours, electricity rates are usually higher than non-peak hours.

Having a smart meter does not affect your ability to change supplier as smart meters speak the same “language” regardless of which energy supplier you are with. You will still be able to choose between interval and non-interval smart services. However, the product plans and offers may vary across different electricity suppliers. This is applicable to all our electricity and dual fuel customers.

• You may receive estimated bills if you have a smart meter but have not yet enabled smart services.
• If you have Interval (30 minute) Smart Services activated, you may receive estimation on your bill if your smart meter was not able to communicate with ESB Networks to provide your 30-minute usage data. In such cases, the estimated usage will be replaced by actual usage as soon as the meter connectivity is restored to normal. Adjustments will be made to your next bill accordingly.
• If you have Non-Interval (Bi-Monthly) Smart Service activated, we will receive your meter read once every two months from ESB Networks and if this does not align with your billing cycle you may get an estimated bill. To avoid this, non-interval customers are advised to submit their meter reads regularly. 

• You may receive estimated bills if you have a smart meter but have not yet enabled smart services.
• If you have Interval (30 minute) Smart Services activated, you may receive estimation on your bill if your smart meter was not able to communicate with ESB Networks to provide your 30-minute usage data. In such cases, the estimated usage will be replaced by actual usage as soon as the meter connectivity is restored to normal. Adjustments will be made to your next bill accordingly.
• If you have Non-Interval (Bi-Monthly) Smart Service activated, we will receive your meter read once every two months from ESB Networks and if this does not align with your billing cycle you may get an estimated bill. To avoid this, non-interval customers are advised to submit their meter reads regularly.

As a smart meter customer, when you switch to a time of use tariff, you will have a choice to either share your meter read once every two months or share your 30-minute usage data every day.

You will have an ongoing choice over whether your energy usage data is retrieved daily or not. So, at any point in time, you can choose not to have your 30-minute usage data logged and you can switch to non-interval services. You will still be subject to the terms and conditions of your contract and your tariff structure and rates may change. It will also impact some of the smart interval specific services that we provide to you. You will no longer have access to your 30-minute electricity usage information in your Business Online account and we will be unable to provide you energy saving hints and tips based on your energy consumption.

The digital display screen on your new smart meter shows your current meter reading in Kilowatts per hour (kWh). To read the new meter, note the figures on the screen before "kWh" from left to right and include all digits.

To read your meter:

1. Read the numbers from left to right, including any zeros (As shown in the image below highlighted in the red rectangle)
2. Ignore any numbers after the decimal point. If your meter does not have a decimal point, read all numbers, including any zeros. 

To manually submit your meter read you will need to have your 11-digit MPRN number to hand. This can be found on your electricity supply bill and always starts with ’10’.

Please click here for a video demonstration from ESB Networks which can be found under the heading of Smart meter.

Your total meter reading is displayed on the main digital display screen in kWh.
To get your 24H meter reading, take the meter read digits before kWh from left to right and include all digits.

When you press the button once you’ll see the date and time screen and second press of the button will bring you back to the total reading.

The Night meter reading will be displayed first followed by the Day and Peak.

To submit your non-interval meter reads, you’ll need to submit your night, day and peak reads separately.

• Night reading: Press the left blue button 3 times until you see A+ and T1 alternating in the top right-hand corner of the screen. This will show your night reading.

• Day reading: Press the left blue button 4 times until you see A+ and T2 alternating in the top right-hand corner of the screen. This will show your day reading.

• Peak reading: Press the left blue button 5 times until you see A+ and T3 alternating in the top right-hand corner of the screen. This will show your peak reading.

A sixth press will bring you to test screen display.

• Exported electricity reading: If you are a Microgen customer you can also view your net export of electricity. Press the left blue button 7 times until you see A- in the top right-hand side of the screen Please note that you do not need to submit this reading to us.

Other resources

ESB Networks have provided a useful video to help you read your Smart Meter, watch it here.

Note: If you have a smart meter for electricity with Interval (30 minute) Smart Services enabled, you don't need to submit readings as your usage is logged remotely by your meter. If your meter has Non-Interval (Bi-Monthly) Smart Services enabled, it's still recommended that you submit regular meter readings

How to change from a day and night meter to a Smart meter?

You may have received a letter from the ESBN about the National Smart Metering programme inviting you to make a Smart meter exchange. If you have a day and night meter and are looking to make this change, you can do so by contacting us.

After speaking with us, we will send a request to ESBN to include your Smart meter in the exchange programme. Following this request, ESBN will then contact you about the installation.

Once your meter is in the exchange programme, ESBN will then send out some correspondence, notifying you when they’re due to exchange meters in your area. Additionally, they’ll send out a letter closer to the time of the exchange.

The estimated Smart Meter exchange date will be a minimum 4-7 months from the date SSE Airtricity contact ESB Networks on your behalf.

What will happen after my Smart meter is exchanged?

Once your current meter type is exchanged, your new Smart Meter will be installed as a smart day/night meter type and you will remain on your day / night rates until you can activate your smart services.

ESBN will begin to establish the level of connectivity they have to your meter. This will take 30 days for ESBN to establish your meters connectivity level.

If after 30 days you’ve a connectivity level of 3 or 4, more Smart Services will become available to you, such as Interval Smart Services.